MULTI-AIR BLANKET
Air & Vapor Barrier
A SEAMLESS, HIGH PERFORMANCE AIR BARRIER SOLUTION
MULTI-AIR BLANKET is a water based and environmentally friendly seamless air and vapor barrier membrane. The BLANKET as a fluid applied air and vapor barrier provides an effective and economical means of protecting the structure long-term. It can be applied over gypsum and cement-based sheathings, OSB, plywood, CMU, and concrete.
FEATURES
- No Seams
- Fast Drying
- Highly Flexible
- Cost-Effective
RESISTANT TO
- FIRE / SALT
- FREEZE / THAW
- UV
- WATER VAPOR
SUITABLE SUBSTRATE
Wood
Concrete
Metal
Foam
| COMPONENTS | COVERAGE |
| MULASTICOAT | Per Gallon: 100 – 150 ft2 |
- STEP
- PRODUCT INFO
- INSTRUCTIONS
- 1
MULASTICOAT
waterproof membrane40 sqft/gallon
Apply Mulasticoat with a sprayer or roller lighter than normal. Saturate Polyester Stitch Bond Fabric with Mulasticoat on all joints and seams. *Coverage should triple in comparison to its normal below or above grade waterproofing coverage rate as it only needs to be 10 mils thick.
Learn more about MULASTICOATCUSTOMIZE THIS SYSTEM
TO FIT YOUR NEEDS
Click the testing/evaluation report below to download.
MULASTICOAT
Tensile Bond Adhesion to Concrete Tensile Strength
Method: ASTM C-297 Result: 162 psi (cohesive)
Tensile Strength
Method: ASTM D-412 Result: 99 psi
Elongation
Method: ASTM 2370 Result: 1,086%
Hydrostatic Head
Method: 12” Water/Film @ 40mil Result: Pass 96 Hrs/no effect
Hydrostatic Pressure
Method: ASTM C-1306 Result: Pass >45 psi (.0003 Perms)
Crack Bridging
Method: ASTM C1305 Result: Pass (1148% Elongation)
Nail Sealability
Method: ASTM D1970 – Sec. 7.9 Result: Pass (with fabric)
Q: Can you use a sprayer to apply Mulasticoat?
A: Yes, the Mulasticoat can be sprayed using an airless sprayer.
Q: Is The Air Barrier System green friendly?
A: Yes, the VOC (volatile organic compounds) content in the products are less than 5 grams/liter. All of the products used are water-based as well. Unlike many competitors that claim to be “water-based” but also contain petroleum byproducts, Mulasticoat is made from 100% water born acrylics and contains ZERO ASPHALT EMULSION.
Q: Is the Air Barrier System expensive?
A: The Premium Slatex System is cost effective when comparing it to other Vapor/Air Barrier Systems. This system typically also outperforms traditional house wrap due to its lack of seals and penetration into the substrate.
Q: How do you bridge expansion joints and wall/floor 90º joints?
A: We recommend embedding a material called Polyester Stitch Bond Fabric into the first coat of Mulasticoat to act as a reinforcement material for high movement areas. It is an inexpensive way to ensure security and rigidity in areas that may be subject to extreme movement over time.
Click the testing/evaluation report below to download.
MULASTICOAT
Tensile Bond Adhesion to Concrete Tensile Strength
Method: ASTM C-297 Result: 162 psi (cohesive)
Tensile Strength
Method: ASTM D-412 Result: 99 psi
Elongation
Method: ASTM 2370 Result: 1,086%
Hydrostatic Head
Method: 12” Water/Film @ 40mil Result: Pass 96 Hrs/no effect
Hydrostatic Pressure
Method: ASTM C-1306 Result: Pass >45 psi (.0003 Perms)
Crack Bridging
Method: ASTM C1305 Result: Pass (1148% Elongation)
Nail Sealability
Method: ASTM D1970 – Sec. 7.9 Result: Pass (with fabric)
Q: Can you use a sprayer to apply Mulasticoat?
A: Yes, the Mulasticoat can be sprayed using an airless sprayer.
Q: Is The Air Barrier System green friendly?
A: Yes, the VOC (volatile organic compounds) content in the products are less than 5 grams/liter. All of the products used are water-based as well. Unlike many competitors that claim to be “water-based” but also contain petroleum byproducts, Mulasticoat is made from 100% water born acrylics and contains ZERO ASPHALT EMULSION.
Q: Is the Air Barrier System expensive?
A: The Premium Slatex System is cost effective when comparing it to other Vapor/Air Barrier Systems. This system typically also outperforms traditional house wrap due to its lack of seals and penetration into the substrate.
Q: How do you bridge expansion joints and wall/floor 90º joints?
A: We recommend embedding a material called Polyester Stitch Bond Fabric into the first coat of Mulasticoat to act as a reinforcement material for high movement areas. It is an inexpensive way to ensure security and rigidity in areas that may be subject to extreme movement over time.
