AQUA PROOF
FLUID APPLIED MEMBRANE
AQUA PROOF is a Do-It-Yourself waterproofing material for small fountains, water features and ponds. This material is designed to waterproof new or existing concrete (or block) fountains, ponds, reflection pools, etc. Simply roll or brush on one or two coats. Variety of colors available (See Color Charts below).
SUITABLE SUBSTRATE
Wood
Concrete
Metal
Foam
AVAILABLE COLORS
| COVERAGE |
| Per Gallon: 40-50ft2 |
AVAILABLE SIZES
| 1 Gallon Cans | 5 Gallon Buckets |
Click “Show More” to view instructions, or click the link below to download it to your computer.
INSTRUCTION SHEET >
SURFACE PREPARATION
- Surface must be structurally sound and free from grease, oil, dirt, dust, sealers, water repellents and other foreign materials which may interfere with proper bonding.
- All cracks & holes must be filled with suitable cementitious material (such as Multicoat’s Speed Mix 2000) before membrane is applied.
- Certain types of porous block/substrates must be parged before applying waterproofing membrane. Substrate must be completely dry to avoid gassing or bubbling of waterproof membrane.
- If membrane bubbles, cut the bubble out and let dry, then re-coat area.
- Coat complete interior to the top edge of container.
- New concrete must cure 20 days before applying the waterproof membrane. If this product is to be used for ponds or fountains meant to contain fish, all instructions on the reverse side must be carefully followed.
MIXING
- Stir AQUA PROOF with hand paddle.
APPLICATION
A minimum of two coats will be required. Roll or brush all corners with a light coat first and allow those areas to dry. Once corners are dry, roll or brush over entire area to be waterproofed at a coverage rate of 80 to 100 sq. ft. per coat per gallon. Allow material to dry between coats. Dry time will be affected by weather conditions. Allow material to dry until it is tack free (could take 2 days or more) before adding water. Make sure not to puddle membrane in the corners. The “White” color and rough or porous substrates may require additional coats for complete coverage and uniform appearance. Prior to filling, thoroughly inspect to insure complete, uniform coverage and that no pinhole areas are visible.
Click “Show More” to view all of the Packaging & Storage information.
SIZES
- 1 Gallon Cans
- 5 Gallon Buckets
STORE AT
- 40-90°F.
SHELF LIFE
- Approximately 18 months in unopened containers.
Click “Show More” to view Warranty Info, or click the link below to download it to your computer.
WARRANTY SHEET >
Multicoat Corporation offers a special 5-year Limited Materials Warranty to Trained and Certified Applicators. This Limited Warranty (effective upon date of purchase) protects the Applicator against delamination problems with all Multicoat systems, as well as water intrusion of Multicoat’s Waterproofing System, provided:
1. Multicoat system has been properly applied by a certified applicator.
2. Problem is determined to be due to defect of Multicoat Corporation’s products.
3. Applicator has prepared and filed the required Warranty Information Form(s) with Multicoat Products, Inc. covering the specific customer job(s).
NOTE:
Warranty is not applicable if there is movement or cracking of the underlying base and/or the weight bearing cement covering of the waterproofing membrane.
Failure to adhere to good construction and workmanship practices based on industry standard construction, means, methods, sequences and techniques could result in delamination, de-bonding and water intrusion for which Multicoat will not be responsible.
The end user must look to the Certified Applicator for satisfaction if any problem develops with the Multicoat system covered by the warranty. Multicoat suggests that the customer:
1. Use only a licensed contractor in good standing (fully bonded).
2. Make certain that the applicator has been certified by Multicoat, prior to work
commencing or certification while on the job. A simple phone call to Multicoat is sufficient to determine if an applicator is certified and if such certification is in
good standing.
In the event that it is determined that the Applicator failed to install the system(s) in accordance with Multicoat’s “instructions for use” or “specifications”, the warranty is void. See specific warranty information below.
WARRANTY
Materials are guaranteed with respect to uniformity and quality within
manufacturer’s specifications.
WARRANTY DISCLAIMER
There are no warranties which extend beyond the description of the fact hereof. Seller expressly disclaims all other warranties regarding the use of its products, whether expressed or implied, including the implied warranties of merchantability and for fitness of a particular purpose. Since use of the product is beyond the
Seller’s control, the Buyer assumes all risk of use.
EXCLUSIVE REMEDY
Seller’s sole obligation, and buyer’s exclusive remedy shall be to replace material if found to be defective.
DAMAGE LIMITATION
Seller shall not be liable for any damages, injury, loss, direct or consequential,
resulting from its products. The parties intend that the limitation of damages,
including consequential damages, applies even if the exclusive remedy provided for herein fails of its essential purpose.
- lorem
- lorem
- lorem
Click “Show More” to view instructions, or click the link below to download it to your computer.
INSTRUCTION SHEET >
SURFACE PREPARATION
- Surface must be structurally sound and free from grease, oil, dirt, dust, sealers, water repellents and other foreign materials which may interfere with proper bonding.
- All cracks & holes must be filled with suitable cementitious material (such as Multicoat’s Speed Mix 2000) before membrane is applied.
- Certain types of porous block/substrates must be parged before applying waterproofing membrane. Substrate must be completely dry to avoid gassing or bubbling of waterproof membrane.
- If membrane bubbles, cut the bubble out and let dry, then re-coat area.
- Coat complete interior to the top edge of container.
- New concrete must cure 20 days before applying the waterproof membrane. If this product is to be used for ponds or fountains meant to contain fish, all instructions on the reverse side must be carefully followed.
MIXING
- Stir AQUA PROOF with hand paddle.
APPLICATION
A minimum of two coats will be required. Roll or brush all corners with a light coat first and allow those areas to dry. Once corners are dry, roll or brush over entire area to be waterproofed at a coverage rate of 80 to 100 sq. ft. per coat per gallon. Allow material to dry between coats. Dry time will be affected by weather conditions. Allow material to dry until it is tack free (could take 2 days or more) before adding water. Make sure not to puddle membrane in the corners. The “White” color and rough or porous substrates may require additional coats for complete coverage and uniform appearance. Prior to filling, thoroughly inspect to insure complete, uniform coverage and that no pinhole areas are visible.
Click “Show More” to view all of the Packaging & Storage information.
SIZES
- 1 Gallon Cans
- 5 Gallon Buckets
STORE AT
- 40-90°F.
SHELF LIFE
- Approximately 18 months in unopened containers.
Click “Show More” to view Warranty Info, or click the link below to download it to your computer.
WARRANTY SHEET >
Multicoat Corporation offers a special 5-year Limited Materials Warranty to Trained and Certified Applicators. This Limited Warranty (effective upon date of purchase) protects the Applicator against delamination problems with all Multicoat systems, as well as water intrusion of Multicoat’s Waterproofing System, provided:
1. Multicoat system has been properly applied by a certified applicator.
2. Problem is determined to be due to defect of Multicoat Corporation’s products.
3. Applicator has prepared and filed the required Warranty Information Form(s) with Multicoat Products, Inc. covering the specific customer job(s).
NOTE:
Warranty is not applicable if there is movement or cracking of the underlying base and/or the weight bearing cement covering of the waterproofing membrane.
Failure to adhere to good construction and workmanship practices based on industry standard construction, means, methods, sequences and techniques could result in delamination, de-bonding and water intrusion for which Multicoat will not be responsible.
The end user must look to the Certified Applicator for satisfaction if any problem develops with the Multicoat system covered by the warranty. Multicoat suggests that the customer:
1. Use only a licensed contractor in good standing (fully bonded).
2. Make certain that the applicator has been certified by Multicoat, prior to work
commencing or certification while on the job. A simple phone call to Multicoat is sufficient to determine if an applicator is certified and if such certification is in
good standing.
In the event that it is determined that the Applicator failed to install the system(s) in accordance with Multicoat’s “instructions for use” or “specifications”, the warranty is void. See specific warranty information below.
WARRANTY
Materials are guaranteed with respect to uniformity and quality within
manufacturer’s specifications.
WARRANTY DISCLAIMER
There are no warranties which extend beyond the description of the fact hereof. Seller expressly disclaims all other warranties regarding the use of its products, whether expressed or implied, including the implied warranties of merchantability and for fitness of a particular purpose. Since use of the product is beyond the
Seller’s control, the Buyer assumes all risk of use.
EXCLUSIVE REMEDY
Seller’s sole obligation, and buyer’s exclusive remedy shall be to replace material if found to be defective.
DAMAGE LIMITATION
Seller shall not be liable for any damages, injury, loss, direct or consequential,
resulting from its products. The parties intend that the limitation of damages,
including consequential damages, applies even if the exclusive remedy provided for herein fails of its essential purpose.
- lorem
- lorem
- lorem
