CLEAR20
GLOSS CLEAR SEALER
CLEAR20 consists of a series of high quality waterbase modified resins that provide a high quality, durable seal on masonry, cementitious, and other building substrates. Not typically used in Colorseal applications, however it can be used to achieve a glossy, wet look. Is also used in conjunction with MULTI-STAIN to lock in the color. CLEAR20 can also be used on most masonry and stone substrates.
SUITABLE SUBSTRATE
Wood
Concrete
Metal
Foam
AVAILABLE COLORS
| COVERAGE |
| Per Gallon: 150-200ft 2 |
AVAILABLE SIZES
| 1 Gallon Jugs | 5 Gallon Pails |
Click “Show More” to view instructions, or click the link below to download it to your computer.
INSTRUCTION SHEET >
SURFACE PREPARATION
- Substrate must be structurally sound and free from grease, oil, dirt, dust, sealers, water repellents and other foreign materials which may interfere with proper bonding.
- Surface must be completely dry prior to CLEAR20 application.
- Multicoat KRETE KOTE and TOP COAT must be allowed to set up and cure for at least 24 to 48 hours before application.
- New concrete should be allowed to cure for a minimum of 20 days, and be free from curing compounds, release agents if any, and other water repellent materials which may prevent proper bonding.
- Do not use on treated lumber.
MIXING
- Mix to uniformity with slow speed mixer.
- DO NOT DILUTE CLEAR20, use as packaged.
APPLICATION
METHODS
- 1/2″ Nap Roller (for smooth surfaces)
- 3/4″ Nap Roller (for rough surfaces)
- Brush
- Airless Sprayer
INSTRUCTIONS
- One coat application is recommended for a semi-gloss appearance.
- Two coats will have a shiny gloss appearance.
- CLEAR20 goes on white and dries clear.
Click “Show More” to view all of the Packaging & Storage information.
SIZES
- 1 Gallon Jugs
- 5 Gallon Pails
STORE AT
- 50-90°F.
SHELF LIFE
- Approximately 24 months in unopened containers.
Click “Show More” to view Warranty Info, or click the link below to download it to your computer.
WARRANTY SHEET >
Multicoat Corporation offers a special 5-year Limited Materials Warranty to Trained and Certified Applicators. This Limited Warranty (effective upon date of purchase) protects the Applicator against delamination problems with all Multicoat systems, as well as water intrusion of Multicoat’s Waterproofing System, provided:
1. Multicoat system has been properly applied by a certified applicator.
2. Problem is determined to be due to defect of Multicoat Corporation’s products.
3. Applicator has prepared and filed the required Warranty Information Form(s) with Multicoat Products, Inc. covering the specific customer job(s).
NOTE:
Warranty is not applicable if there is movement or cracking of the underlying base and/or the weight bearing cement covering of the waterproofing membrane.
Failure to adhere to good construction and workmanship practices based on industry standard construction, means, methods, sequences and techniques could result in delamination, de-bonding and water intrusion for which Multicoat will not be responsible.
The end user must look to the Certified Applicator for satisfaction if any problem develops with the Multicoat system covered by the warranty. Multicoat suggests that the customer:
1. Use only a licensed contractor in good standing (fully bonded).
2. Make certain that the applicator has been certified by Multicoat, prior to work
commencing or certification while on the job. A simple phone call to Multicoat is sufficient to determine if an applicator is certified and if such certification is in
good standing.
In the event that it is determined that the Applicator failed to install the system(s) in accordance with Multicoat’s “instructions for use” or “specifications”, the warranty is void. See specific warranty information below.
WARRANTY
Materials are guaranteed with respect to uniformity and quality within
manufacturer’s specifications.
WARRANTY DISCLAIMER
There are no warranties which extend beyond the description of the fact hereof. Seller expressly disclaims all other warranties regarding the use of its products, whether expressed or implied, including the implied warranties of merchantability and for fitness of a particular purpose. Since use of the product is beyond the
Seller’s control, the Buyer assumes all risk of use.
EXCLUSIVE REMEDY
Seller’s sole obligation, and buyer’s exclusive remedy shall be to replace material if found to be defective.
DAMAGE LIMITATION
Seller shall not be liable for any damages, injury, loss, direct or consequential,
resulting from its products. The parties intend that the limitation of damages,
including consequential damages, applies even if the exclusive remedy provided for herein fails of its essential purpose.
- lorem
- lorem
- lorem
Click “Show More” to view instructions, or click the link below to download it to your computer.
INSTRUCTION SHEET >
SURFACE PREPARATION
- Substrate must be structurally sound and free from grease, oil, dirt, dust, sealers, water repellents and other foreign materials which may interfere with proper bonding.
- Surface must be completely dry prior to CLEAR20 application.
- Multicoat KRETE KOTE and TOP COAT must be allowed to set up and cure for at least 24 to 48 hours before application.
- New concrete should be allowed to cure for a minimum of 20 days, and be free from curing compounds, release agents if any, and other water repellent materials which may prevent proper bonding.
- Do not use on treated lumber.
MIXING
- Mix to uniformity with slow speed mixer.
- DO NOT DILUTE CLEAR20, use as packaged.
APPLICATION
METHODS
- 1/2″ Nap Roller (for smooth surfaces)
- 3/4″ Nap Roller (for rough surfaces)
- Brush
- Airless Sprayer
INSTRUCTIONS
- One coat application is recommended for a semi-gloss appearance.
- Two coats will have a shiny gloss appearance.
- CLEAR20 goes on white and dries clear.
Click “Show More” to view all of the Packaging & Storage information.
SIZES
- 1 Gallon Jugs
- 5 Gallon Pails
STORE AT
- 50-90°F.
SHELF LIFE
- Approximately 24 months in unopened containers.
Click “Show More” to view Warranty Info, or click the link below to download it to your computer.
WARRANTY SHEET >
Multicoat Corporation offers a special 5-year Limited Materials Warranty to Trained and Certified Applicators. This Limited Warranty (effective upon date of purchase) protects the Applicator against delamination problems with all Multicoat systems, as well as water intrusion of Multicoat’s Waterproofing System, provided:
1. Multicoat system has been properly applied by a certified applicator.
2. Problem is determined to be due to defect of Multicoat Corporation’s products.
3. Applicator has prepared and filed the required Warranty Information Form(s) with Multicoat Products, Inc. covering the specific customer job(s).
NOTE:
Warranty is not applicable if there is movement or cracking of the underlying base and/or the weight bearing cement covering of the waterproofing membrane.
Failure to adhere to good construction and workmanship practices based on industry standard construction, means, methods, sequences and techniques could result in delamination, de-bonding and water intrusion for which Multicoat will not be responsible.
The end user must look to the Certified Applicator for satisfaction if any problem develops with the Multicoat system covered by the warranty. Multicoat suggests that the customer:
1. Use only a licensed contractor in good standing (fully bonded).
2. Make certain that the applicator has been certified by Multicoat, prior to work
commencing or certification while on the job. A simple phone call to Multicoat is sufficient to determine if an applicator is certified and if such certification is in
good standing.
In the event that it is determined that the Applicator failed to install the system(s) in accordance with Multicoat’s “instructions for use” or “specifications”, the warranty is void. See specific warranty information below.
WARRANTY
Materials are guaranteed with respect to uniformity and quality within
manufacturer’s specifications.
WARRANTY DISCLAIMER
There are no warranties which extend beyond the description of the fact hereof. Seller expressly disclaims all other warranties regarding the use of its products, whether expressed or implied, including the implied warranties of merchantability and for fitness of a particular purpose. Since use of the product is beyond the
Seller’s control, the Buyer assumes all risk of use.
EXCLUSIVE REMEDY
Seller’s sole obligation, and buyer’s exclusive remedy shall be to replace material if found to be defective.
DAMAGE LIMITATION
Seller shall not be liable for any damages, injury, loss, direct or consequential,
resulting from its products. The parties intend that the limitation of damages,
including consequential damages, applies even if the exclusive remedy provided for herein fails of its essential purpose.
- lorem
- lorem
- lorem
