Slide-0
Slide-0
Slide-0

FIBERGLASS MESH

TOOLS AND ACCESSORIES
CEMENT REINFORCEMENT

FIBERGLASS MESH is a woven, 6×6 alkali resistant fiberglass mesh used in the ICF Stucco System. It is designed to be a reinforcing material to add strength to the coatings.

SUITABLE SUBSTRATE

Foam

AVAILABLE COLORS

White
see all
COVERAGE
Per Roll: 450 ft 2

AVAILABLE SIZES

38″ x 150′ Rolls

INSTRUCTIONS

First, apply a coat of Foam Base or base coat material to the substrate. Then, place the fiberglass mesh on top of the wet material and using a trowel or a roller, push the mesh into the base coat until it sits below the surface. Apply more material on top if needed.

SIZES:

  • 38″ x 150′ rolls

STORAGE:

  • 40-90°F.
  • Low humidity environment to keep adhesive working

INSTRUCTIONS

First, apply a coat of Foam Base or base coat material to the substrate. Then, place the fiberglass mesh on top of the wet material and using a trowel or a roller, push the mesh into the base coat until it sits below the surface. Apply more material on top if needed.

SIZES:

  • 38″ x 150′ rolls

STORAGE:

  • 40-90°F.
  • Low humidity environment to keep adhesive working