LIQUID CATALYST
ACRYLIC ADDITIVE
A proprietary additive blend that enhances the bonding, tensile, and water resistant properties of many cement bag mixes.
SUITABLE SUBSTRATE
Concrete
AVAILABLE COLORS
| COVERAGE |
| Per Bucket: 130 lb of cement |
AVAILABLE SIZES
| 5 Gallon Bucket |
APPLICATION
Field mixed in the approximate amount of 2 to 2-1/2 gallons of Liquid Catalyst per bag, preferably with a special MULTICOAT Mixing Paddle. (More or less liquid catalyst may be needed depending upon ambient temperature.
Mix vigorously to disperse all lumps and to thoroughly wet all particles. Suggest 1-11⁄2 minutes after all dry material added. Use margin trowel to clear vessel walls. For best results let cement mix stand in bucket for 3-5 minutes then add a small amount of Liquid Catalyst to re-break material. This will give the material additional pot life.
Check for consistency by applying with a 11⁄4” nap roller. Applied material should peak not slump.
If too thick small clumps will come away with roller. Add small amount of Liquid Catalyst, remix and retest. If material slumps add solids, remix and retest. Dampen pool substrate with water before application.
SIZES:
- 5 Gallon Bucket
STORAGE:
- 40-90°F.
- Low humidity environment
SHELF LIFE:
- Approx. 24 months in unopened containers.
Multicoat Corporation offers a special 5-year Limited Materials Warranty to Trained and Certified Applicators. This Limited Warranty (effective upon date of purchase) protects the Applicator against delamination problems with all Multicoat systems, as well as water intrusion of Multicoat’s Waterproofing System, provided:
1. Multicoat system has been properly applied by a certified applicator.
2. Problem is determined to be due to defect of Multicoat Corporation’s products.
3. Applicator has prepared and filed the required Warranty Information Form(s) with Multicoat Products, Inc. covering the specific customer job(s).
NOTE:
Warranty is not applicable if there is movement or cracking of the underlying base and/or the weight bearing cement covering of the waterproofing membrane.
Failure to adhere to good construction and workmanship practices based on industry standard construction, means, methods, sequences and techniques could result in delamination, de-bonding and water intrusion for which Multicoat will not be responsible.
The end user must look to the Certified Applicator for satisfaction if any problem develops with the Multicoat system covered by the warranty. Multicoat suggests that the customer:
1. Use only a licensed contractor in good standing (fully bonded).
2. Make certain that the applicator has been certified by Multicoat, prior to work
commencing or certification while on the job. A simple phone call to Multicoat is sufficient to determine if an applicator is certified and if such certification is in
good standing.
In the event that it is determined that the Applicator failed to install the system(s) in accordance with Multicoat’s “instructions for use” or “specifications”, the warranty is void. See specific warranty information below.
WARRANTY
Materials are guaranteed with respect to uniformity and quality within
manufacturer’s specifications.
WARRANTY DISCLAIMER
There are no warranties which extend beyond the description of the fact hereof. Seller expressly disclaims all other warranties regarding the use of its products, whether expressed or implied, including the implied warranties of merchantability and for fitness of a particular purpose. Since use of the product is beyond the
Seller’s control, the Buyer assumes all risk of use.
EXCLUSIVE REMEDY
Seller’s sole obligation, and buyer’s exclusive remedy shall be to replace material if found to be defective.
DAMAGE LIMITATION
Seller shall not be liable for any damages, injury, loss, direct or consequential,
resulting from its products. The parties intend that the limitation of damages,
including consequential damages, applies even if the exclusive remedy provided for herein fails of its essential purpose.
APPLICATION
Field mixed in the approximate amount of 2 to 2-1/2 gallons of Liquid Catalyst per bag, preferably with a special MULTICOAT Mixing Paddle. (More or less liquid catalyst may be needed depending upon ambient temperature.
Mix vigorously to disperse all lumps and to thoroughly wet all particles. Suggest 1-11⁄2 minutes after all dry material added. Use margin trowel to clear vessel walls. For best results let cement mix stand in bucket for 3-5 minutes then add a small amount of Liquid Catalyst to re-break material. This will give the material additional pot life.
Check for consistency by applying with a 11⁄4” nap roller. Applied material should peak not slump.
If too thick small clumps will come away with roller. Add small amount of Liquid Catalyst, remix and retest. If material slumps add solids, remix and retest. Dampen pool substrate with water before application.
SIZES:
- 5 Gallon Bucket
STORAGE:
- 40-90°F.
- Low humidity environment
SHELF LIFE:
- Approx. 24 months in unopened containers.
Multicoat Corporation offers a special 5-year Limited Materials Warranty to Trained and Certified Applicators. This Limited Warranty (effective upon date of purchase) protects the Applicator against delamination problems with all Multicoat systems, as well as water intrusion of Multicoat’s Waterproofing System, provided:
1. Multicoat system has been properly applied by a certified applicator.
2. Problem is determined to be due to defect of Multicoat Corporation’s products.
3. Applicator has prepared and filed the required Warranty Information Form(s) with Multicoat Products, Inc. covering the specific customer job(s).
NOTE:
Warranty is not applicable if there is movement or cracking of the underlying base and/or the weight bearing cement covering of the waterproofing membrane.
Failure to adhere to good construction and workmanship practices based on industry standard construction, means, methods, sequences and techniques could result in delamination, de-bonding and water intrusion for which Multicoat will not be responsible.
The end user must look to the Certified Applicator for satisfaction if any problem develops with the Multicoat system covered by the warranty. Multicoat suggests that the customer:
1. Use only a licensed contractor in good standing (fully bonded).
2. Make certain that the applicator has been certified by Multicoat, prior to work
commencing or certification while on the job. A simple phone call to Multicoat is sufficient to determine if an applicator is certified and if such certification is in
good standing.
In the event that it is determined that the Applicator failed to install the system(s) in accordance with Multicoat’s “instructions for use” or “specifications”, the warranty is void. See specific warranty information below.
WARRANTY
Materials are guaranteed with respect to uniformity and quality within
manufacturer’s specifications.
WARRANTY DISCLAIMER
There are no warranties which extend beyond the description of the fact hereof. Seller expressly disclaims all other warranties regarding the use of its products, whether expressed or implied, including the implied warranties of merchantability and for fitness of a particular purpose. Since use of the product is beyond the
Seller’s control, the Buyer assumes all risk of use.
EXCLUSIVE REMEDY
Seller’s sole obligation, and buyer’s exclusive remedy shall be to replace material if found to be defective.
DAMAGE LIMITATION
Seller shall not be liable for any damages, injury, loss, direct or consequential,
resulting from its products. The parties intend that the limitation of damages,
including consequential damages, applies even if the exclusive remedy provided for herein fails of its essential purpose.
