MASONRY STENCILS
DECORATIVE PATTERN FINISH
STENCILS (ADHESIVE BACKED) are used to create patterns in overlay systems. Great for stucco applications and for concrete overlayment systems. Create the look of brick, stone, tile, etc., without the cost. Single use, peel the release paper, stick to the surface and overcoat.
SUITABLE SUBSTRATE
Concrete
AVAILABLE COLORS
| COVERAGE |
| See “Patterns & Dimensions” |
AVAILABLE SIZES
| 1 Unit: 1 Box |
PATTERNS AND DIMENSIONS
INSTRUCTIONS
Multicoat’s stencils are designed for professional use. Typically used in the Stucco Industry and the Decorative Concrete Industry. The adhesive release paper is removed to expose the adhesive then the sheet is placed into position and seated to insure a good bond so that no edges are raised. The finish material, synthetic stucco or cement-based materials are then applied and finished over top of the stencil and allowed to set. Once the initial set has taken place the stencil is removed which will expose the desired pattern.
- COLOR: White with light colored release liner
- THICKNESS: .024 pt and .060 pt
- ADHESIVE: Water Soluble
- PAPER: Clay Coated Face
- SERVICE TEMPERATURES: 40°F to 105°F
PATTERNS AND DIMENSIONS
INSTRUCTIONS
Multicoat’s stencils are designed for professional use. Typically used in the Stucco Industry and the Decorative Concrete Industry. The adhesive release paper is removed to expose the adhesive then the sheet is placed into position and seated to insure a good bond so that no edges are raised. The finish material, synthetic stucco or cement-based materials are then applied and finished over top of the stencil and allowed to set. Once the initial set has taken place the stencil is removed which will expose the desired pattern.
- COLOR: White with light colored release liner
- THICKNESS: .024 pt and .060 pt
- ADHESIVE: Water Soluble
- PAPER: Clay Coated Face
- SERVICE TEMPERATURES: 40°F to 105°F
