Slide-0

MULTI-TEX STUCCO

ACRYLIC STUCCO

MULTI-TEX® is a one-coat stucco system, designed for its cost effectiveness as well as its ease of application. Being a durable and weather-resistant finish, we recommend it for all wood and steel framed structures (residential & commercial).

SUITABLE SUBSTRATE

Wood

Concrete

Metal

Foam

AVAILABLE COLORS

Snow White
Natural White
Country Fog
Pearl Grey
Slate Grey
Beige Shadow
Antique White
White Sand
Blush
Glade Yellow
Chiffon
Sandcastle
Palomino
Tusk Ivory
Light Cream
Oyster White
Peach Blossom
La Paz
Mocha
Chestnut
Olive Brown
Dusty Rose
Mesa Tan
Sandalwood
Desert Sand
Mission
Sierra Taupe
Canyon Sage
Twisted Branch
Clover
see all
COVERAGE
Per Bucket: 80-125 ft 2

AVAILABLE SIZES

5 Gallon Bucket

 

SURFACE PREPARATION:

Smooth primed fibercement siding must be structurally sound, and surface must be free from grease, oil, paint, dirt, dust, sealers, laitence, and other foreign materials that may PREVENT PROPER BONDING. Proper expansion joints should be installed according to applicable local building codes or structural engineer. (Recommended: Approximately every 16 feet.)

NOTE: A moisture barrier or house wrap may be necessary in some applications. Check local building codes or structural engineer.

APPLICATION

Apply a skim coat of smooth stucco over all joints and corners, allow to dry. Then apply Multicoat STUCCO MIX directly to wall board with trowel or sprayer, and finish to desired texture.

Do not apply if wall board surface temperature is below 50°F, or over 100°F.

Do not apply if ambient temperature is less than 50°F and falling, over 100°F and rising, or if precipitation or extreme high humidity is expected within a 12-hour period.

 

SIZES:

  • 5 Gallon Bucket

STORAGE:

  • 40-90°F.
  • Low humidity environment

SHELF LIFE:

  • Approx. 24 months in unopened containers.

Click the Safety Data Sheet below to download


SAFETY DATA SHEET


 

Multicoat Corporation offers a special 5-year Limited Materials Warranty to Trained and Certified Applicators. This Limited Warranty (effective upon date of purchase) protects the Applicator against delamination problems with all Multicoat systems, as well as water intrusion of Multicoat’s Waterproofing System, provided:

  • 1. Multicoat system has been properly applied by a certified applicator.
  • 2. Problem is determined to be due to defect of Multicoat Corporation’s products.
  • 3. Applicator has prepared and filed the required Warranty Information Form(s) with Multicoat Products, Inc. covering the specific customer job(s).

NOTE:

Warranty is not applicable if there is movement or cracking of the underlying base and/or the weight bearing cement covering of the waterproofing membrane. Failure to adhere to good construction and workmanship practices based on industry standard construction, means, methods, sequences and techniques could result in delamination, debonding and water instrusion for which Multicoat will not be responsible.

The end user must look to the Certified Applicator for satisfaction if any problem develops with the Multicoat system covered by the warranty. Multicoat suggests that the customer:

  • 1. Use only a licensed contractor in good standing (fully bonded).
  • 2. Make certain that the applicator has been certified by Multicoat, prior to work commencing or certification while on the job. A simple phone call to Multicoat is sufficient to determine if an applicator is certified and if such certification is in good standing.

In the event that it is determined that the Applicator failed to install the system(s) in accordance with Multicoat’s “instructions for use” or “specifications”, the warranty is void. See specific warranty information below.

WARRANTY 

Materials are guaranteed with respect to uniformity and quality within manufacturer’s specifications.

WARRANTY DISCLAIMER 

There are no warranties which extend beyond the description of the fact hereof. Seller expressly disclaims all other warranties regarding the use of its products, whether expressed or implied, including the implied warranties of merchantability and for fitness of a particular purpose. Since use of the product is beyond the Seller’s control, the Buyer assumes all risk of use.

EXCLUSIVE REMEDY 

Seller’s sole obligation, and buyer’s exclusive remedy shall be to replace material if found to be defective.

DAMAGE LIMITATION 

Seller shall not be liable for any damages, injury, loss, direct or consequential, resulting from its products. The parties intend that the limitation of damages, including consequential damages, applies even if the exclusive remedy provided for herein fails of its essential purpose.

 

SURFACE PREPARATION:

Smooth primed fibercement siding must be structurally sound, and surface must be free from grease, oil, paint, dirt, dust, sealers, laitence, and other foreign materials that may PREVENT PROPER BONDING. Proper expansion joints should be installed according to applicable local building codes or structural engineer. (Recommended: Approximately every 16 feet.)

NOTE: A moisture barrier or house wrap may be necessary in some applications. Check local building codes or structural engineer.

APPLICATION

Apply a skim coat of smooth stucco over all joints and corners, allow to dry. Then apply Multicoat STUCCO MIX directly to wall board with trowel or sprayer, and finish to desired texture.

Do not apply if wall board surface temperature is below 50°F, or over 100°F.

Do not apply if ambient temperature is less than 50°F and falling, over 100°F and rising, or if precipitation or extreme high humidity is expected within a 12-hour period.

 

SIZES:

  • 5 Gallon Bucket

STORAGE:

  • 40-90°F.
  • Low humidity environment

SHELF LIFE:

  • Approx. 24 months in unopened containers.

Click the Safety Data Sheet below to download


SAFETY DATA SHEET


 

Multicoat Corporation offers a special 5-year Limited Materials Warranty to Trained and Certified Applicators. This Limited Warranty (effective upon date of purchase) protects the Applicator against delamination problems with all Multicoat systems, as well as water intrusion of Multicoat’s Waterproofing System, provided:

  • 1. Multicoat system has been properly applied by a certified applicator.
  • 2. Problem is determined to be due to defect of Multicoat Corporation’s products.
  • 3. Applicator has prepared and filed the required Warranty Information Form(s) with Multicoat Products, Inc. covering the specific customer job(s).

NOTE:

Warranty is not applicable if there is movement or cracking of the underlying base and/or the weight bearing cement covering of the waterproofing membrane. Failure to adhere to good construction and workmanship practices based on industry standard construction, means, methods, sequences and techniques could result in delamination, debonding and water instrusion for which Multicoat will not be responsible.

The end user must look to the Certified Applicator for satisfaction if any problem develops with the Multicoat system covered by the warranty. Multicoat suggests that the customer:

  • 1. Use only a licensed contractor in good standing (fully bonded).
  • 2. Make certain that the applicator has been certified by Multicoat, prior to work commencing or certification while on the job. A simple phone call to Multicoat is sufficient to determine if an applicator is certified and if such certification is in good standing.

In the event that it is determined that the Applicator failed to install the system(s) in accordance with Multicoat’s “instructions for use” or “specifications”, the warranty is void. See specific warranty information below.

WARRANTY 

Materials are guaranteed with respect to uniformity and quality within manufacturer’s specifications.

WARRANTY DISCLAIMER 

There are no warranties which extend beyond the description of the fact hereof. Seller expressly disclaims all other warranties regarding the use of its products, whether expressed or implied, including the implied warranties of merchantability and for fitness of a particular purpose. Since use of the product is beyond the Seller’s control, the Buyer assumes all risk of use.

EXCLUSIVE REMEDY 

Seller’s sole obligation, and buyer’s exclusive remedy shall be to replace material if found to be defective.

DAMAGE LIMITATION 

Seller shall not be liable for any damages, injury, loss, direct or consequential, resulting from its products. The parties intend that the limitation of damages, including consequential damages, applies even if the exclusive remedy provided for herein fails of its essential purpose.